Your septic tank takes everything that goes down the drains in your home, from the toilet to the kitchen sink to the washing machine, and breaks it down so the water can soak back into the ground. It can keep doing this for years without any trouble, as long as you stick to a few good habits and keep up with some light septic tank maintenance.
We’ll start with how to make things safe and how quickly you need a plumber if your drains have already backed up, then take you through the habits and checks that stop it happening on a random Tuesday.
Work Out How Urgent Your Septic Problem Is
Some septic problems need a plumber in the middle of the night, but plenty of them can wait a day or two. The signs you’re noticing will tell you which of those you’re dealing with.
When to call a plumber ASAP
Any of these means the problem can’t wait until morning:
- Sewage coming up through a toilet, shower or floor drain
- Sewage pooling on the ground over your tank or trenches
- The ground sinking around the tank, or the lid sitting out of place after a flood
- Your AWTS power switch tripping again after you’ve reset it
- Your AWTS sprinklers spraying water that smells like sewage
While you wait for the plumber, stop using water in the house altogether. Every flush, shower or load of washing goes into a system that already has nowhere to send it, which means it comes straight back up through your drains.
Keep the kids and pets inside as well, because sewage carries bacteria that can make them sick.
And if you’re tempted to lift the tank lid and see what’s gone wrong – DON’T. The gases that build up inside are too dangerous to breathe, so leave that to your plumber when they arrive.
Book a plumber within a day or two
These signs mean your system is struggling. It can usually hold on until a plumber gets to you, but the problem will keep growing the longer you leave it:
- Several drains running slowly or gurgling at the same time, which usually means the tank is full or the outlet filter has clogged
- A sewage smell around the tank that’s still there the next day
- Your AWTS alarm sounding again after you’ve muted it and checked the power switch hasn’t tripped
- Your AWTS blower staying silent even though the power is on. The blower pumps in the air your system’s bacteria need, so without it, the system stops treating wastewater.
- The ground over your trenches staying soggy several dry days after rain, which can mean an overfull tank is pushing solids out into the trenches
Until the plumber has been, go easy on water so the tank has less to deal with. And if your blower isn’t working, keep everyone off the sprinkler area too, since that water is going out untreated.
Our plumbers are on call 24/7 across Townsville for septic tank emergencies, and when the problem can wait, we can book you in for a visit in the next day or two. Get in touch with our team today!
Build Daily Habits That Keep Your Septic System Flowing
Your septic tank relies on bacteria to break down everything your household sends its way, so the healthier you keep them, the better your whole system works. Most of that comes down to small things you do around your home each day.
Only flush toilet paper and human waste. Wipes, cotton buds and sanitary products hold together far longer than toilet paper does, so they collect in the pipes and the tank until they cause a blockage. That includes wipes labelled “flushable”, which take much longer to break down than the packet suggests.
Put fats and oils in the bin. Cooking fat runs down the sink easily while it’s hot, but once it cools in the pipes and the tank, it sets hard and narrows the pipe a little more every time. Let it cool in a jar or container first, then throw it out with the rubbish.
Choose gentle cleaning products. Bleach-heavy cleaners and chemical drain openers kill the bacteria your tank depends on, so it can’t break down waste as well as it should. A bit of bleach for everyday cleaning is fine in normal amounts, but if a drain blocks, use a plunger or drain snake to clear it instead of pouring a bottle of drain cleaner down the sink.
Spread your washing across the week. When you run several loads back to back, a rush of water flows into the tank before the solids have time to settle, and it carries some of them out into the trenches, where they clog the soil. So keep it to one or two loads a day, as that gives the tank time to catch up.
Keep cars off the trenches and irrigation area. Your trenches and sprinkler lines sit just under the lawn, and the soil around them needs tiny air gaps for wastewater to soak into. The weight of a car or trailer squashes those gaps closed and can crack the pipes, which leaves the water with nowhere to go but back up to the surface.
Check Your Septic System Every Few Months
Your daily habits do most of the work, but a quick look over the system a few times a year helps you spot the small changes you’d never notice from inside the house.
Clean the outlet filter
Many standard septic tanks have a filter at the outlet, where the liquid leaves the tank on its way to the trenches. It catches the bits of solid waste that would otherwise clog the soil, so it slowly fills up, and once it’s blocked, the wastewater has nowhere to go but back toward the house. Most manufacturers recommend a clean about every three months, which keeps the water moving.
- Pick a day when everything is running normally and pull on a pair of gloves.
- Lift the small access cover on top of the tank and pull the filter out.
- Hose it off over the opening so the waste washes back into the tank.
- Slide the filter back in and close the cover firmly.
Keep your face back while you work, because gases still build up inside, and never lean or reach down into the tank itself. If your tank doesn’t have a filter, or you’d rather not do it yourself, your plumber can clean it during a septic tank maintenance visit.
Walk over the trenches or irrigation area
The patch of yard where your wastewater soaks away is usually where problems show up first, so take a walk over it every now and then. As you go, look out for:
- A strip of grass that’s greener and thicker than the rest of the lawn, which tells you wastewater is rising closer to the surface than it should
- Spongy ground underfoot, which points to the same thing
- Tree and shrub roots creeping close, since they go looking for water and will grow into the pipes if they can reach them
You can trim back smaller growth yourself, but leave the bigger trees for a plumber to check, since a shovel in the wrong spot can crack a pipe. If you have an AWTS, make sure the sprinkler heads aren’t blocked or buried under grass, and keep that part of the yard as open lawn in full sun, which helps the treated water dry off and soak away.
Check the lids and the AWTS panel
While you’re out in the yard, give the lids on your tank a quick check as well. Each one should sit flat and firm with no cracks, because a loose lid lets rainwater run into the tank, and a cracked one can break if someone steps on it.
If you have an AWTS, have a look at the alarm panel on your way back in. A warning light sometimes comes on before the alarm sounds, so when you catch one early, you can book a plumber at a time that suits you and let them find the cause before it turns into an emergency.
Stay on Schedule With Professional Septic Tank Maintenance
Good daily habits and regular checks are the DIY side of septic tank maintenance. They look after the parts of your system you can see, but the inside of the tank and the equipment that runs it need someone with the right gear and licence to check them properly.
Pump out a standard septic tank every 3–5 years
Even with good habits, your tank holds on to some of what goes into it. Bacteria break down most of the waste, but some solids are too tough for them, so they sink to the bottom and slowly build up into a layer of sludge.
That layer grows a little every year. As it does, it takes up the space your wastewater needs, and eventually there’s so little room left that solids start spilling out into the trenches. At that point, the trenches themselves need repair, which is a much bigger job.
Regular pump-outs are the core of septic tank maintenance: most tanks need one every three to five years to stay ahead of that. If you have a big household or a smaller tank, yours will probably need it closer to the three-year mark, and your plumber can measure the sludge to tell you exactly when it’s due.
Service an AWTS every three months
An AWTS has a lot more going on than a standard tank.
Along with the tank itself, it runs a blower, pumps, an alarm and a chlorinator, which disinfects the water before it goes out through your sprinklers.
Any one of those parts can wear out quietly, and by the time you notice anything from the house, you could be dealing with a smelly yard, poorly treated water on your lawn, or a tank that backs up into the house. That’s why Queensland rules require an endorsed service agent to look over your system on the manufacturer’s schedule, which for most systems means every three months.
After each visit, your agent sends a copy of the service report to you and another to council, because council keeps a record of every AWTS in the area to make sure it stays on its service schedule. So if your report doesn’t come through when it’s due, they’ll check in with you.
Final Thoughts on Septic Tank Maintenance
Your septic tank sits out of sight, so it’s easy to forget about septic tank maintenance until something goes wrong.
Most of what keeps it healthy, though, comes down to what you send down your drains each day. When you only flush toilet paper, keep the cooking fat in the bin and spread your washing across the week, the tank can do its job with very little help, and a regular service takes care of the rest.
But if your tank does back up, or the alarm keeps going off, our plumbers are on call 24/7 across Townsville. Get in touch with our team, and we’ll get someone out to make things safe and get your system working again.