How to Clean a Sink Drain Yourself, and When Not To

A sink that drains a little slower each week is easy to live with, right up until water starts pooling around the dishes or a sour smell drifts up from the plug hole. Most of the time, the cause sits just a few centimetres below the plug, where grease, food scraps, hair and soap build up with everyday use. You can easily clear it with a proper clean and don’t even need any special gear.

We’ll take you through it step by step. 

Work out what’s built up in your sink drain

Grease, hair, and soap each need a slightly different clean, so you’ll want to know what you’re dealing with before you start. Luckily, your sink usually gives it away very easily. Just see which sink is slow, and the kind of smell coming up from the plug hole, and it will tell you a fair bit about what’s sitting in the pipe.

Kitchen sink draining slowly, with a greasy or sour smell: Fat, oil and tiny food scraps slip down the plug hole every time you wash up. As the fat cools, it sticks to the inside of the pipe and catches more scraps on their way past, so the opening narrows a little more each week.

Bathroom basin draining slowly: Hair is usually behind this one. It wraps around the plug and the short stretch of pipe beneath it, and soap and toothpaste bind it into a sticky clump that holds the water back.

Musty smell from the small hole near the top of the basin: That hole is the overflow. It leads to a narrow channel inside the basin that runs down to the drain, and soap scum and grime collect in there out of sight until they start to smell.

Sewage smell from a sink you rarely use: The bend in the pipe under every sink holds a little water, and that water stops drain air from coming back up through the plug hole. When a basin in a spare bathroom or granny flat sits unused for a few weeks, the water dries up, and the smell finds its way in.

Several sinks or the shower slow at once, gurgling, or water coming up outside: When more than one fixture slows down at the same time, no single sink is to blame. The blockage sits further down the drain that carries all your household wastewater, out of reach of anything you do at the sink.

Most of the time, you can fix the first four easily with a good clean, and we’ve discussed the steps for each below. The last one, though, will need a plumber.

4 Common sink drain build-ups and how to clean them

Now that you know what’s built up in there, you’re ready to tackle the clean. Better still, all of it happens from the top of the sink, at the plug hole and around the basin, so you don’t have to empty out the cupboard or undo any pipes underneath.

1. How to clean a greasy kitchen sink drain

Fat can be stubborn once it sets, but it softens quickly with a bit of heat, which makes the kitchen sink one of the easier drains to clean.

  1. Start by emptying the sink strainer into the bin. It’s already caught plenty of scraps, and you don’t want those washing back down the pipe once the water’s running.
  2. Then squeeze a good dose of dishwashing liquid into the plug hole and run the hot tap for a few minutes. The detergent breaks up the fat, and the hot water carries it down the pipe before it has a chance to set again.

One round usually clears a sink that’s only a little slow. If water still sits in the basin afterwards, give it another go or two, and let the detergent rest in the pipe for a few minutes each time before you run the tap again.

2. How to clean a bathroom sink drain 

As you know, hair is usually the culprit here – thankfully it doesn’t get far. It tends to snag on the plug long before it travels down the pipe, so you can reach almost all of it from the top of the basin.

Most bathroom basins have a pop-up plug that comes out of the plug hole with a twist, a firm pull, or by loosening a small rod at the back of the tap. Once it’s out, you’ll likely find a grey, soapy tangle of hair wrapped around its stem.

  1. Pull the hair off by hand, then wash the plug in warm, soapy water before you pop it back in. For hair caught deeper in the plug hole, a plastic drain hair-removal strip from the supermarket or hardware store slides down and hooks it out.
  2. Then run the hot tap for a minute to flush away any soap you’ve loosened.

With the hair gone, the water should drain away freely again, and you’ll notice the difference the next time you brush your teeth.

3. How to clean a smelly sink overflow

That small hole near the top of your basin is easy to ignore, which is exactly why grime gets the chance to settle in. Each time water spills into it, it carries a little soap scum along, and over the months that coating builds up inside the channel until you start to notice the smell.

  1. Push a thin bottle brush or flexible drain brush into the overflow hole and work it around the inside of the channel to loosen the grime.
  2. Then pour a jug of warm water mixed with a little dishwashing liquid through the hole to rinse away what you’ve loosened.

Once the channel’s clean, that musty whiff should go with it.

4. How to get rid of a sewage smell from a sink you rarely use

It’s a bit baffling when a sink you barely touch starts to smell, and so you naturally assume something has built up in there and gone off from sitting unused. But really, there’s nothing in the pipe at all. The smell is simply drain air drifting up through the plug hole, because the water that normally sits in the bend under the sink, and blocks that air, has dried up. The fix is as simple as putting that water back.

  1. Run the tap for a minute or so to refill the bend under the sink.
  2. Then give it another quick run every week or so, so the water never gets the chance to dry up again.

The smell should clear soon after. If it keeps coming back within a day or two, even with the tap running regularly, the water isn’t staying in the bend, and that points to a fault in the pipework. That’s a job for a plumber, and our team at Emergency Plumbers Townsville is available 24/7 whenever you need us.

Call a plumber when your sink stays slow even after a clean 

If your sink still drains slowly after a good clean, the blockage sits further along the pipe, well past anything you can reach from the plug hole, and that’s the point where you’ll need a licensed plumber to clear it.

You might want to grab a bottle of chemical drain cleaner at this point, but many of these products are caustic and can do you more harm than the blockage itself. ACCC Product Safety counts caustic cleaners among the household products behind the most serious poisoning incidents in Australia, and contact with a corrosive drain cleaner can irritate your eyes and breathing and cause severe burns to your skin. But a plumber can clear the pipe without putting you anywhere near it. 

Before you call, check your shower and other sinks too, since the blockage isn’t always in the one you’ve been cleaning. If they’re slow as well, or the plug holes gurgle, the problem sits in the house drain that carries all your wastewater to the sewer.

You might also spot it outside at the overflow relief gully, a grated cap in the ground that most Townsville homes on the sewer have. When wastewater backs up, the cap pops off so sewage spills outside rather than into your home. If that happens:

  1. Stop using the sinks, shower, toilet and washing machine, as every drop adds to the overflow.
  2. Call a plumber straight away.

Your plumber will track down where the blockage sits, and if it turns out to be in Townsville Water’s sewerage network rather than your house drain, they’ll need permission before working on it. In that case, Council’s 24-hour line on 13 48 10 takes care of it from there.

Contact Emergency Plumbers Townsville for a blocked sink drain

A sink that stays slow can usually wait for a booked visit, but sewage coming up at the gully needs a plumber straight away. Either way, our licensed team at Emergency Plumbers Townsville is available 24/7 and can reach most Townsville suburbs in under 30 minutes, so call us whenever your drains give you trouble!

Scroll to Top